Military grade isolated power module 75W Output 12V YN75-48S12-PEI TN75-48S12-PEI manufacturer from China Enargy Power (Shenzhen) Co.,Ltd.,

Military grade isolated power module 75W Output 12V YN75-48S12-PEI

Place of Origin:

Zhejiang, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: TN75-48S12-PEI

DC-DC Converters 75W Output 12V YN75-48S12-PEI

Key Features
Output power: 75W</

DC-DC Converters 75W Output 12V YN75-48S12-PEI

Key Features

Output power: 75W

Wide input range: 36-72Vdc

High conversion efficiency: Up to 93%

Line regulation to ±0.5%

Load regulation to ±0.5%

Isolation voltage :1500V

Enable (ON/OFF) control

Output over-Current protection

Hiccup mode short circuit protection

Over-temperature protection

Input under-voltage lock-out

Output voltage trim: ±10% Vout

Product Overview

These DC-DC converter modules use advanced power processing, control and packaging technologies to provide the performance, flexibility, reliability and cost effectiveness of a mature power component. High frequency Active Clamp switching provides high power density with low noise and high efficiency.

1. Electric Characteristics

1.1 Absolute Maximum Ratings

Parameter	Min	Typ	Max	Units	Notes
Input Voltage			78	Vdc	Continuous, non-operating
			75	Vdc	Continuous, operating
			78	Vdc	Operating transient protection,<100mS
Isolation Voltage			2000	Vdc	Input to Output
Operating Temperature	-20		85		In view of PCB Temperature
Storage Temperature	-30		95
Enable to -Vin Voltage	-0.8		10	Vdc

1.2 Input Characteristics

Parameter	Min	Typ	Max	Units	Notes
Input Voltage Range	36	48	72	Vdc
Under-Voltage Lockout		35.5	35.8	Vdc	Recovery point
Under-Voltage Lockout	32	34.0		Vdc	Protect point
Maximum Input Curren			2.5	A	Vin min,Output full load
Efficiency		92		%	Rated input;Rated load
Dissipation,standby		7	11	W	No Load
External input		100			Proposed electrolytic capacitor in parallel across the Input. ESR0.1-0.2.

1.3 Output Characteristics

Parameter	Min	Typ	Max	Units	Notes
Output Voltage Set point	11.88	12.00	12.12	Vdc	Rated input voltage,No load
Output Voltage Range	11.76	12.00	12.24	Vdc
Output Current Range	0		6.25	A
Line Regulation		±0.05	±1	%
Load Regulation		±0.09	±1	%
Current Limi	6.8	7.5	8.1	A	Output voltage 95% of nominal
Short Circuit Current	0.3	6.8	7.5	A
Ripple (RMS)		70		mV	Nominal input; full load; 20 MHz bandwidth.
Noise(Peak-to-Peak)		120		mV	Nominal input; full load; 20 MHz bandwidth.
Capacitive load from themachine			3300	μF
External Output	100			μF	Proposed electrolytic capacitor in parallel across the output.ESR 0.1-0.2.